Elring DIRKO HT. (315 C) liquid gasket kit, red, silicone compound, 310 ml Cartridge
temperature resistant single component silicone-based
sealing compound that exhibits permanently resilient
properties. It provides excellent adhesion on all standard metals, cast iron, plastics (except for PE, PP and
PTFE) and glass. Due to a reaction with humidity in the
air Dirko™ HT red cures to form silicone. The product
can be used for a very wide range of applications
Resistant to:
Mineral oils (including additives), synthetic oils,
Lubricating grease, Coolants, UV radiation , cold
and hot water, salt water , cleaning agents, weak
acids and alkalis
Possible applications:
valve cover, oil pan , water pump , oil pump , diff,
rential housing , gearbox, gear oil sump , thermostat housing , control housing , axle cover, lange
connection , headlights, rear light , battery compartment
In 310 ml Cartridge .
Se produkt
Beskrivelse
Dirko™ HT red (acetic curing) is a high-quality, high
temperature resistant single component silicone-based
sealing compound that exhibits permanently resilient
properties. It provides excellent adhesion on all standard metals, cast iron, plastics (except for PE, PP and
PTFE) and glass. Due to a reaction with humidity in the
air Dirko™ HT red cures to form silicone. The product
can be used for a very wide range of applications
Resistant to:
Mineral oils (including additives), synthetic oils,
Lubricating grease, Coolants, UV radiation , cold
and hot water, salt water , cleaning agents, weak
acids and alkalis
Possible applications:
valve cover, oil pan , water pump , oil pump , diff,
rential housing , gearbox, gear oil sump , thermostat housing , control housing , axle cover, lange
connection , headlights, rear light , battery compartment
In 310 ml Cartridge .
Specifikationer
| Max temp (°C) | +315 °C (24u) |
| Oil resistant | Yes |
| Max temp (°C) cont. | -60 tot +300 |
| Chemical basis | Acetoxy silicone |
| Curing | Room temperature vulcanised (RTV) |
| Components | Single component |
| Colour | Red |
| Consistency | Pasty, stable, permanently resilient when cured |
| Max sealing gap | 2,0 mm |
| pH value | Neutral |
| Electrical conductivity | Insulating |
| Hardness | 30 ± 5 |
| Density (g/ml) | 1,1 ± 0,2 |
| Elastic modulus 100\% | 0,6 ± 0,2 N/mm² |
| Elongation at break | 600 ± 100 \% |
| Tensile strength | 2,9 ± 0,2 N/mm² |
| volume | 310 ml |
Bedoemmelser
Der er ingen anmeldelser for dette produkt.
Spørgsmål og svar
Der er endnu ikke stillet spørgsmål om dette produkt.
Vi sender din bestilling med PostNL. Bestillinger afgivet mandag til fredag foer kl. 17:00 sendes samme dag. Vi tilbyder forskellige forsendelsesmuligheder. Du kan vaelge en af mulighederne under kassen.
Forsendelse til Holland (NL)
| Forsendelsesmetode | Ordrebeløb under €99,99 | Ordrebeløb over €99,99 |
|---|---|---|
| Postkassepakke+ med Track & Trace | €5,99 | Ingen forsendelsesomkostninger! |
| Pakke med Track & Trace | €7,99 | Ingen forsendelsesomkostninger! |
| Pakke med Track & Trace, kun angivet adresse | €8,59 | €0,59 |
| Pakke med Track & Trace, kun angivet adresse + underskrift | €8,99 | €1,09 |
| Levering til et PostNL-pakkepunkt | €7,99 | Ingen forsendelsesomkostninger! |
Afhentning i Alphen aan den Rijn (NL)
| Forsendelsesmetode | |
|---|---|
| Afhentning i Alphen aan den Rijn | Ingen forsendelsesomkostninger! |
Se produkt
Beskrivelse
Dirko™ HT red (acetic curing) is a high-quality, high
temperature resistant single component silicone-based
sealing compound that exhibits permanently resilient
properties. It provides excellent adhesion on all standard metals, cast iron, plastics (except for PE, PP and
PTFE) and glass. Due to a reaction with humidity in the
air Dirko™ HT red cures to form silicone. The product
can be used for a very wide range of applications
Resistant to:
Mineral oils (including additives), synthetic oils,
Lubricating grease, Coolants, UV radiation , cold
and hot water, salt water , cleaning agents, weak
acids and alkalis
Possible applications:
valve cover, oil pan , water pump , oil pump , diff,
rential housing , gearbox, gear oil sump , thermostat housing , control housing , axle cover, lange
connection , headlights, rear light , battery compartment
In 310 ml Cartridge .
Specifikationer
| Max temp (°C) | +315 °C (24u) |
| Oil resistant | Yes |
| Max temp (°C) cont. | -60 tot +300 |
| Chemical basis | Acetoxy silicone |
| Curing | Room temperature vulcanised (RTV) |
| Components | Single component |
| Colour | Red |
| Consistency | Pasty, stable, permanently resilient when cured |
| Max sealing gap | 2,0 mm |
| pH value | Neutral |
| Electrical conductivity | Insulating |
| Hardness | 30 ± 5 |
| Density (g/ml) | 1,1 ± 0,2 |
| Elastic modulus 100\% | 0,6 ± 0,2 N/mm² |
| Elongation at break | 600 ± 100 \% |
| Tensile strength | 2,9 ± 0,2 N/mm² |
| volume | 310 ml |
Bedoemmelser
Der er ingen anmeldelser for dette produkt.
Spørgsmål og svar
Der er endnu ikke stillet spørgsmål om dette produkt.
Vi sender din bestilling med PostNL. Bestillinger afgivet mandag til fredag foer kl. 17:00 sendes samme dag. Vi tilbyder forskellige forsendelsesmuligheder. Du kan vaelge en af mulighederne under kassen.
Forsendelse til Holland (NL)
| Forsendelsesmetode | Ordrebeløb under €99,99 | Ordrebeløb over €99,99 |
|---|---|---|
| Postkassepakke+ med Track & Trace | €5,99 | Ingen forsendelsesomkostninger! |
| Pakke med Track & Trace | €7,99 | Ingen forsendelsesomkostninger! |
| Pakke med Track & Trace, kun angivet adresse | €8,59 | €0,59 |
| Pakke med Track & Trace, kun angivet adresse + underskrift | €8,99 | €1,09 |
| Levering til et PostNL-pakkepunkt | €7,99 | Ingen forsendelsesomkostninger! |
Afhentning i Alphen aan den Rijn (NL)
| Forsendelsesmetode | |
|---|---|
| Afhentning i Alphen aan den Rijn | Ingen forsendelsesomkostninger! |
